Colt Nipple Pro Suckers by Cal Exotics (Black/Clear)

What the COLT Nipple Pro-Suckers are

The COLT Nipple Pro-Suckers are a pair of twist-adjustable nipple suction cylinders made by California Exotic Novelties, finished in black and clear and carrying manufacturer model number SE-6892-15-2. One package holds two identical cylinders, so both sides are covered in a single purchase. There is no pump bulb, no hose, no tubing and no battery compartment anywhere in the set — the knurled cap on top of each cylinder is the only control, and turning it is what changes the draw.

They sit in the COLT Gear range, which California Exotic Novelties produces alongside COLT Studio Group; the back of the card carries copyright notices for both companies. If you are comparing formats before you buy, the rest of the range is grouped under adult toys, where pumps, clamps and suction-style pieces sit side by side.

Materials and construction

The manufacturer lists three materials on the back of the package, one for each part of the cylinder. The barrel is AS — acrylonitrile styrene, a rigid, glass-clear plastic chosen here because it stays transparent rather than clouding, which is why the plunger position can be read at a glance. The cap and the internal plunger are ABS, a tougher, opaque engineering plastic that takes repeated threading without the screw thread wearing smooth. The seal that meets the skin is silicone, a soft, non-porous elastomer that wipes clean and does not absorb moisture.

That three-material split is worth understanding because it tells you how to look after the set. The clear barrel is the part that scratches if you scrub it with anything abrasive; the silicone seal is the part that decides whether the cylinder holds its draw at all. A wide flanged base is moulded as part of that seal, giving a broad flat contact ring rather than a narrow rim.

Each cylinder is a single sealed assembly in use, but it comes apart into its separate pieces for washing — the manufacturer specifically describes the design as disassembling for easy cleaning, and the card illustrates the plunger and screw thread lifting clear of the barrel.

How to use and adjust them

The package instruction is a single line: twist the cap to adjust the suction. Seat the flanged silicone base flat against the skin first, then turn the cap — the internal screw draws the plunger up the barrel and the draw builds gradually as you keep turning. Turning the cap the other way releases it just as gradually, which is the practical advantage of a threaded design over a squeeze bulb: you are setting a position, not pumping toward one, so the same setting is repeatable and you can back it off by a fraction rather than all at once.

Start at the lightest setting and give it a moment before adjusting further. The manufacturer's own direction on the card is to discontinue use in the event of any medical condition or pain, and because the cap turns both ways you can act on that straight away. The card does not state a maximum wear time, so if you are unsure, keep early sessions brief and always remove the cylinders by unwinding the cap rather than by pulling.

Cleaning and care

California Exotic Novelties instructs washing the set before and after each use. Unscrew the cap, separate the plunger from the barrel and wash each piece in warm water with a mild soap, paying attention to the thread grooves and the inside face of the silicone seal where residue collects. Rinse fully, let every part air-dry before reassembling, and store the set dry — a barrel put away damp is the usual reason a clear plastic cylinder goes cloudy.

Avoid abrasive pads, bleach and alcohol-based cleaners on the AS barrel, since all three craze rigid clear plastic. If you use a lubricant to help the base seat, a water-based one rinses off these materials most easily and will not interact with the silicone seal.

Who they are for

These suit adults 18 and over who want a hands-free nipple accessory that holds a set position without anyone having to keep squeezing a bulb. The set format makes it a reasonable starting point rather than a specialist piece: two matched cylinders, one control each, nothing to charge and nothing to replace. Couples often find the twist cap easier to hand over than a pump, since the adjustment is incremental and easy to reverse. They also appear in our women's toys and accessories selection, as the design is not gender-specific.

They are not a good match if you want vibration, app control or a rechargeable device — this is a purely mechanical accessory with no electronics in it at all.

Good to know

The back of the package states plainly that this is for adult use as a non-medical pleasure device only and is not for medical use. Keep it out of reach of children. Because it is a shared-contact item, wash it between users as well as between uses. Anyone with a skin condition, a circulation concern or any medical condition affecting the chest should speak to a licensed healthcare professional before using suction products of any kind.

No Proposition 65 warning is printed on the packaging, and the manufacturer gives no dimensions, weight or material-grade certifications, so none are stated here.

Frequently Asked Questions

How do you adjust the suction on the COLT Nipple Pro-Suckers?

You twist the cap on top of each cylinder. The cap drives an internal screw thread that moves the plunger up the barrel, so the draw builds as you turn it one way and releases as you turn it back. There is no pump bulb, trigger or valve to operate.

What are these made of?

Three materials, listed by the manufacturer on the back of the package: AS plastic for the clear barrel, ABS for the cap and the internal plunger, and silicone for the seal that contacts the skin. The silicone seal is non-porous and wipes clean, and the clear AS barrel is what makes the plunger position readable.

How many are in the package?

Two cylinders, identical to each other. Each one works independently and has its own twist cap, so the pair can be set differently if you want.

Do they need batteries?

No. The COLT Nipple Pro-Suckers are entirely mechanical — the twist cap and internal screw are the whole mechanism, so there is nothing to charge, no battery compartment and no motor.

How is the order packaged for delivery?

Orders ship in plain, unmarked outer packaging with no product imagery or wording on the outside. The billing descriptor is discreet as well, and the item is sent inside its sealed manufacturer blister card.

Product information compiled and reviewed by the Gear Isle product team. We transcribe product specifications directly from manufacturer packaging. Found an error? Tell us.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease. Adult novelty device for adults 18 and over. Consult a licensed healthcare professional before use, especially if you have a medical condition. Keep out of reach of children.